If you have error 42 on your Precor 956i computer, we hope this user guide will help you solve it.
The one stop solution for all your Windows related problems
The error means that a multi-level incline (lift) on the treadmill, EFX elliptical trainer, or AMT12 has also been commanded to move, and the system has detected a series of lifting motions. The most likely cause is a blown fuse on the bottom circuit board.
PCB software installsPCB, mostly named or more high PCA or lower PCA. expects special tools to convert A/D to A/D. is considered to be significantly reduced in a certain range. If the A/D value is outside this range, error 44 will be displayed. Without a doubt, the most likely cause of this error is that the motor is moving further than it should or is stuck in the housing. This error can also be caused by a loose connector or a bad potentiometer in the motor assembly.
- If the self propelled lift motor has moved too far, disconnect the motor from the lift assembly and readjust the jack screw until the sickles are within reach. Perform the required motor travel calibration procedure. If the engine is still too weak, let the engine drift.
- Inspect the lift motor connector to make sure the pins are fully seated in the connector. Attach the connector to the bottom board of the board, making sure it clicks into the connector.
- Enter Diagnostics, Machine Test, Incline Ramp or Cross Ramp Test. Do the method of lifting everything, this way you lengthen and return to the minimum. The A/D number should continue to rise and fall throughout the test. Not if the mining engine is replaced. Maximize your computer's potential with this helpful software download.
Jak Naprawić Błąd 49 Precor 956i?
Hur åtgärdar Man Fel 49 Precor 956i?
Como Corrigir O Erro 45 Precor 956i?
Come Correggere Direttamente L’errore 42 Precor 956i?
Hoe Kan Ik Fout Tweeënveertig Precor 956i Oplossen?
알림 방법 . 오류 42 Precor 956i?
Wie Behebt Man Fehler 42 Precor 956i?
Comment Faire L’erreur 42 Precor 956i ?
Как исправить ошибку 42 Precor 956i?
¿Cómo Solucionar El Error 42 Precor 956i?